logo

제품 세부 정보

Created with Pixso. Created with Pixso. 상품 Created with Pixso.
물 - 근거한 에폭시 수지
Created with Pixso.

Non-ionic Modified Epoxy Emulsion for Two-component Epoxy Coatings with Epoxy Equivalent 950 ± 50 g/eq

Non-ionic Modified Epoxy Emulsion for Two-component Epoxy Coatings with Epoxy Equivalent 950 ± 50 g/eq

브랜드 이름: WeiLi
모델 번호: WL-B02
모크: 5000KGS
가격: Negotiate
지불 조건: t/t
공급 능력: 500톤
자세한 정보
원래 장소:
중국
인증:
ISO9001
특징:
다양한 용매와의 우수한 호환성
성능:
높은 경도와 뛰어난 접착력
이점:
우수한 내화학성
에폭시 등가물(공급된 대로):
950±50g/eq
점도(25°C, #3 스핀들, 6rpm):
100~5,000cps
견고한 내용:
57±1%
포장 세부 사항:
플라스틱 드럼
강조하다:

Solid Content 57 ± 1% Non-ionic Modified Epoxy Emulsion

,

pH 7 ± 1 Water Based Epoxy Resin

,

Epoxy Equivalent 950 ± 50 g/eq Epoxy Resin Emulsion

제품 설명
Non-ionic Modified Epoxy Emulsion For Two-component Epoxy Coatings Used In Metal Substrate
WL-B02 is a non-ionic modified epoxy emulsion designed for formulating water-based two-component epoxy coatings when combined with an amino curing agent. It is suitable for application on metallic and various other substrates, and is particularly recommended for epoxy intermediate coatings and zinc-rich epoxy primers.
Physical Properties
Property Value
Appearance Milky white liquid emulsion
Solid Content 57 ± 1%
pH (25°C) 7 ± 1
Epoxy Equivalent (as supplied) 950 ± 50 g/eq
Viscosity (25°C, #3 spindle, 6 rpm) 100-5,000 cps
Performance Characteristics
  • Excellent compatibility with a wide range of solvents
  • Cured film exhibits high hardness and outstanding adhesion
  • Superior chemical resistance and salt spray resistance
Storage Conditions
Store in a dry, indoor environment in the original sealed container. Avoid exposure to direct sunlight. Maximum storage temperature should not exceed 30°C.
Special Notes
This product has been developed based on our current technology and practical experience. The technical advice provided is offered in good faith but without guarantee, as performance may vary depending on application conditions and formulation. All data and recommendations are for reference purposes only, and users are advised to conduct their own testing to verify suitability for intended use.